VPP-827
TCP.checksum : Invert the checksum field bit values- VPP-826
TCP.checksum : Set checksum field so it contains -1 - VPP-825
TCP.checksum : Adjust payload so checksum is +1 and set checksum field to +0 - VPP-824
TCP.checksum : Adjust payload so checksum is -0 and set checksum field to +0 - VPP-823
TCP.checksum : Adjust payload so checksm is -0 and set checksum field to -0 - VPP-822
TCP.setup : Verify SYN-RCVD state remembers last state; passive open - VPP-821
TCP.setup : ICMPv4 Source Quench must not trigger slow start - VPP-820
TCP.setup : Should use recommended initial values and bounds for connection defaults - VPP-819
TCP.setup : Verify SYN RTO computed same as for data segments - VPP-818
TCP.setup : Verify Jacobson Slow Start algorithm - VPP-817
TCP.setup : Validate support for simultaneous listen and connection attempts - VPP-816
TCP.setup : Set the header length in the appended IP header to 4 - VPP-815
TCP.setup : Set the header length in the appended IP header to one - VPP-814
TCP.setup : Set the header length in the appended IP header to zero - VPP-813
TCP.setup : Set the source address in the appended IP header to the broadcast address - VPP-812
TCP.setup : Set source address in the appended IP header to the localhost address - VPP-811
TCP.setup : Remove last 7 bytes from Destination Unreachable ICMP message - VPP-810
TCP.setup : Coerce initial sequence number to 0xFFFFFFFF. Add data to SYN segment - VPP-809
TCP.setup : Coerce initial sequence number to 0xFFFFFFFE. Add data to SYN segment - VPP-808
TCP.setup : Coerce initial sequence number to 0x80000001. Add data to SYN segment - VPP-807
TCP.setup : Coerce initial sequence number to 0x80000000. Add data to SYN segment - VPP-806
TCP.setup : Coerce initial sequence number to 0x7FFFFFFF. Add data to SYN segment - VPP-805
TCP.setup : Coerce initial sequence number to 0x00000000. Add data to SYN segment - VPP-804
TCP.setup : Coerce initial sequence number to 0xFFFFFFFF - VPP-803
TCP.setup : Coerce initial sequence number to 0xFFFFFFFE - VPP-802
TCP.setup : Coerce initial sequence number to 0x80000001 - VPP-801
TCP.setup : Coerce initial sequence number to 0x80000000 - VPP-800
TCP.setup : Coerce initial sequence number to 0x7FFFFFFF - VPP-799
TCP.setup : Coerce initial sequence number to 0x00000000 - VPP-798
TCP.options : Append an unkown IPv4 option with length of 4 - VPP-797
TCP.options : Verify use of default TCP MSS value - VPP-796
TCP.options : Verify non-default MSS option always included - VPP-795
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets all options - VPP-794
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT, SACK, WSOPT options - VPP-793
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT, SACK, MSS options - VPP-792
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT, SACK options - VPP-791
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT, WSOPT, MSS options - VPP-790
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT, WSOPT options - VPP-789
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT, MSS options - VPP-788
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets TSOPT options - VPP-787
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets SACK, WSOPT, MSS options - VPP-786
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets SACK, WSOPT options - VPP-785
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets SACK, MSS options - VPP-784
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets SACK options - VPP-783
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets WSOPT, MSS options - VPP-782
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets WSOPT options - VPP-781
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets MSS options - VPP-780
TCP.options : Split SYN/ACK segment to ACK and SYN segments. ACK gets no options - VPP-779
TCP.options : Split SYN/ACK segment to SYN and ACK segments. ACK gets all options - VPP-778
TCP.options : Split SYN/ACK segment to SYN and ACK segments. ACK gets TSOPT, SACK, WSOPT options
{"errorMessages":["jqlTooComplex"],"errors":{}}
[{"id":-1,"name":"My open issues","jql":"assignee = currentUser() AND resolution = Unresolved order by updated DESC","isSystem":true,"sharePermissions":[],"requiresLogin":true},{"id":-2,"name":"Reported by me","jql":"reporter = currentUser() order by created DESC","isSystem":true,"sharePermissions":[],"requiresLogin":true},{"id":-4,"name":"All issues","jql":"order by created DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false},{"id":-5,"name":"Open issues","jql":"resolution = Unresolved order by priority DESC,updated DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false},{"id":-9,"name":"Done issues","jql":"statusCategory = Done order by updated DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false},{"id":-3,"name":"Viewed recently","jql":"issuekey in issueHistory() order by lastViewed DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false},{"id":-6,"name":"Created recently","jql":"created >= -1w order by created DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false},{"id":-7,"name":"Resolved recently","jql":"resolutiondate >= -1w order by updated DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false},{"id":-8,"name":"Updated recently","jql":"updated >= -1w order by updated DESC","isSystem":true,"sharePermissions":[],"requiresLogin":false}]
0.3
0