TC01: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
TG-DUTn.
[Cfg] On DUT1 and DUT2 configure IPv4 LISP static adjacencies.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across both\
DUTs and LISP tunnel between them; verify IPv6 headers on received\
packets are correct.
[Cfg2] Reconf LISP.
[Ver2] Verify packets are received again via LISP tunnel.
[Ref] RFC6830.

TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using physical interfaces and VRF is enabled
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
TG-DUTn.
[Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
[Ver] Case: ip6-lispgpe-ip4 - vrf, phy2lisp
Make TG send ICMPv4 Echo Req between its interfaces across both\
DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
received packets are correct.
[Ref] RFC6830.

TC03: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using vhost interfaces
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on\
TG-DUTn.
[Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2.
[Ver] Case: ip6-lispgpe-ip4 - main fib, virt2lisp
Make TG send ICMPv6 Echo Req between its interfaces across both\
DUTs and LISP GPE tunnel between them; verify IPv6 headers on\
received packets are correct.