TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int.
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP
on TG-DUTn.
[Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across both
DUTs and LISP GPE tunnel between them; verify IPv4 headers on received
packets are correct.
[Ref] RFC6830.

TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMPv4 on DUT1-DUT2, Eth-IPv4-ICMP
on TG-DUTn.
[Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across both
DUTs and LISP GPE tunnel between them; verify IPv4 headers on received
packets are correct.
[Ref] RFC6830.

TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int.
[Documentation]
Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp \
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv6-LISPGPE-IPSec-IPv4-ICMP on DUT1-DUT2, Eth-IPv4-ICMP
on TG-DUTn.
[Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge
between two vhosts.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across both
DUTs and LISP GPE tunnel between them; verify IPv6 headers on received
packets are correct.
[Ref] RFC6830.

TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
[Documentation]
Case: ip6-ipsec-lispgpe-ip6 - main fib, virt2lisp \
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv6-LISPGPE-IPSec-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6
on TG-DUTn.
[Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across both
DUTs and LISP GPE tunnel between them; verify IPv6 headers on received
packets are correct.
[Ref] RFC6830.