TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on RLOC Int.
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP
on TG-DUTn.
[Cfg] Configure IPv6 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across
both DUTs and LISP GPE tunnel between them; verify IPv6 headers on
received packets are correct.
[Ref] RFC6830, RFC4303.

TC02: DUT1 and DUT2 route IPv4 bidirectionally over LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMP
on TG-DUTn.
[Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS.
[Ver] Make TG send ICMPv6 Echo Req between its interfaces across
both DUTs and LISP GPE tunnel between them; verify IPv6 headers on
received packets are correct.
[Ref] RFC6830, RFC4303.

TC03: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on RLOC Int.
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-LISPGPE-IPSec-IPv6-ICMP on DUT1-DUT2, Eth-IPv6-ICMP
on TG-DUTn.
[Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS. Create Qemu vm on DUT1 and configure bridge
between two vhosts.
[Ver] Case: ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp
Make TG send ICMPv6 Echo Req between its interfaces across
both DUTs and LISP GPE tunnel between them; verify IPv6 headers on
received packets are correct.
[Ref] RFC6830, RFC4303.

TC04: DUT1 and DUT2 route IPv6 over Vhost to LISP GPE tunnel using IPsec (transport) on lisp_gpe0 Int.
[Documentation]
[Top] TG-DUT1-DUT2-TG.
[Enc] Eth-IPv4-IPSec-LISPGPE-IPv6-ICMPv6 on DUT1-DUT2,
Eth-IPv6-ICMPv6, on TG-DUTn.
[Cfg] Configure IPv4 LISP static adjacencies on DUT1 and DUT2 with
IPsec in between DUTS.
[Ver] Case: ip4-ipsec-lispgpe-ip6 - main fib, virt2lisp
Make TG send ICMPv6 Echo Req between its interfaces across
both DUTs and LISP GPE tunnel between them; verify IPv6 headers on
received packets are correct.
[Ref] RFC6830, RFC4303.